Elements Necessary
24" eighteen-gauge sterling silver wire
Pre-produced sterling silver cuff bracelet
(You can make your own cuff bracelet from large
gauge sterling silver rectangle wire if you favor.)
Resources Wanted
Liver of sulfur or oxidizing Answer
Ruler
Marker
Spherical nose pliers Wire cutters or tin snips File
Chain nose pliers Fine steel wool Sharpening fabric Protection glasses
1. Implement liver of sulfur or oxidizing Answer on the 24" of eighteen-gauge sterling silver wire.
It is critical to adhere to any safety suggestions the maker implies around the directions when working with any chemical compounds. You will utilize the good steel wool about the oxidized wire to get rid of a number of the darkened locations Once you full the wrapping course of action.
2.Make use of the ruler to evaluate and mark the 24" of 18-gauge wire into four sections. Evaluate and mark the wire at seven", twelve*. and seventeen".
three.Upcoming, measure and mark the center of the highest of your cuff bracelet (as it’s curved, you could just kind of eyeball it). Then use the ruler to measure and mark %" from the middle of the cuff to both sides.
4.Firmly grasp the marked Heart with the 24" 18-gauge wire inside the jaws in the spherical nose pliers. Make use of your fingers to bend the perimeters right down to type an upside-down U shape (the wire will resemble a sizable bobby pin).
When working with lengthy pieces of wire, protection Eyeglasses are encouraged.
five.Slide the wire on to the sterling silver cuff bracelet to the middle χειÏοποίητα δαχτυλίδια mark. Pinch the wire restricted onto the cuff bracelet and, whilst Keeping the wire over the cuff along with your fingers, wrap 1 facet with the wire randomly towards the Vi' mark that you just built on the highest on the cuff bracelet. You will want to enjoy wherever the 7" as well as φθηνά ανδÏικά δαχτυλίδια 17' marks are on the wire and utilize them to match up With all the Vi" mark that you simply made over the cuff bracelet.
eight. Make use of the spherical nose pliers to curl the ends of the wire up to the κολιΠμε το όνομά σου wrapped wire επισκευÎÏ‚ κοσμημάτων around the underside on the cuff bracelet. Utilize the chain nose pliers to firmly squeeze the finally ends up into one other wrapped wire. This will likely continue to keep the ends securely in position.
six.Finish wrapping the wire on the opposite side, matching up the 7" and the 17" marks to the cuff bracelet Using the Vi" marks to the eighteen-gauge wire.
seven.Now wrap the wire on a single aspect again toward the center on the cuff bracelet. Then wrap the wire on one other side in the cuff bracelet back again towards the middle. You might need to trim and file the ends of your wire so which they wind up to the bottom from the cuff bracelet.
nine. Use fine steel wool to get rid of the darkened space around the surface area on the wire, leaving the spots within the crevices on the wrapped wire darkish. Buff the wrapped wire plus the cuff bracelet that has a sprucing fabric.
What information would you provide a beginning artist?
Λ portrait teacher when instructed me that via the 500th portrait I would be truly excellent. Lesson-follow; κολιΠμε όνομα follow every single day.
Follow a person medium and do it rather well. Craftsmanship is key.
This cuff is perfect for men as well as Ladies. Use the greater Gentlemen's measurement of pre-manufactured cuff bracelet and incorporate further size on the 18-gauge sterling silver wire, typically six to 8 inches to support
the more substantial Gentlemen’s cuff bracelet.
